I have received a few emails requesting the size of the hardware for the front fender to steering column.
Thanx to Eric W., who provided me with this:
"I just put the fender on the fork friday. The top of the fender is 3
slotted m3 bolts. They are 3/4 inch in length. The two on the side of
the fender are slotted m5 bolts. They are 1/2 inch in length." -- Eric
Correction:
"Yeah, the top bolts are not 3mm. They are 5mm x .80 x 18mm hex head bolts, no markings on the head. Good place for stainless since you can polish off the bolt head markings, and it's a non high stress location." -- Paul
Subscribe to:
Post Comments (Atom)
2 comments:
I think there are only two bolts on the top of the fender, and surely they are larger than M3. Probably M4 or M5.
Yeah, the top bolts are not 3mm. They are 5mm x .80 x 18mm hex head bolts, no markings on the head. Good place for stainless since you can polish off the bolt head markings, and it's a non high stress location.
- Paul B.
Post a Comment