Friday, December 28, 2007

Ted's shop


The SS180 has had four homes since it was rescued from a an old farm. It's lived with Eric Hughes, me, at Christopher Markley's shop, and now Ted's shop.


Ted is a KTM-man or shall I say freak! He and wife ride and own a lot of bikes. Thanx Ted for taking in the VSC and helping with the reassembly.

Parts Order No. 1

For Christmas my family gave the SS180:
1) Cable set
2) MeCur rear shock spring
3) Wiring harness
4) Steering column upper and lower bearings
5) Rear shock dampener block
6) Patches for my riding coat

Total damage = $132.00 (that saved us from buying)

These items should get the reassembly started.

Replace Rim Studs

Stop! Don't bang out your old studs. They are welded in place with a tack weld. You will damage them on the way out. Try and reuse what you have first. My shop guy Ted was tapping one out for me to bring with me to the hardware store to buy stainless steel split washers and nuts and low and behold we stopped tapping out the stud right away after we made a little mess of the powder coat. Crap!

MOST IMPORTANT:
There are two important characteristics in a restorer: experience and patience. For what I lack in experience I try to make up for with patience. When hammering out a stud or some metal on your bike (other than body) ALWAYS use a block of wood or copper hammer (use a hammer with metal softer than what you are hitting) and save yourself from stripping threads or causing permanent damage. Take your time! Sometimes commonsense goes by the wayside when we get excited. Patience is a virtue and pays itself back time and time again.

Front Shock Rebuild Complete

A big thank you to my motorcycle buddy Ted for rebuilding my front shock. Ted is a high school guidance counselor now, but in a previous life he was a shop guy and does stuff the ol'skool way -- similar to Christopher Markley. The shock looks beautiful!
Ted followed the instructions on the rebuild I gave him from the Jets Scooter Club web page on how to rebuild a GS/SS front shock. See my previous post on rebuilding the front shock for more information.
I have looked high and low for this little rubber piece and have not found it. I will need to make one out of a dense rubber. It does not need to keep oil from dripping -- it just acts as a dampener.

I did not need to replace the rubber seal inside that is near impossible to find, but the good news is I have the one I purchased as a spare for the future.

Note: if you are looking to rebuild your GS/SS front shock . . . go check out www.scoot.net "parts for sale" as there is a guy selling the front and rear shock already rebuilt.

Thursday, December 27, 2007

Rear shock update

Replaced the rusty stock spring (rear shock) with a MeCur spring. Dropping it off at Christopher Markley's today to be powder coated black. Need to rebuild the rear shock so we can install the engine in the frame.

Powder coat cost = $12.50

Photo of rear shock stock is on Technica page #51. Click the page to enlarge. It's a good idea to study these photos from time to time when restoring an SS180 so you can remember what the finished bike should look like . . . for example had I revisited the photos I would have known where the junction box goes and I would not have thought something was missing . . . see previous post: "Engine - Missing Fastener?".