Thursday, December 27, 2007

Wiring (without battery)

Thanx to Palmog for both the instructions below and a spare junction box, which he shipped to me from Japan, as I believe my junction box is in bad shape as I remember it being taped up in painter's tape like my High Tension Coil (or there is a slim chance that is in good shape and just taped together for storage purposes -- not to loose screws. I can't remember). We did upgrade our stock HT Coil, which the case cracked and broke, to a PX125 HT Coil. The idea being better spark and brighter lights.

Emailed from Palmog:

Hi Jeremy,

ok, then you have an AC bike with original wiring harness. Assuming so, we can use the wiring diagram for GS160 non-battery model here as a basic,
http://www.scooterhelp.com/manuals/VSB1T.manual/24.jpg


We need four terminal on the junction box as the figure shows. (dots on the junction box in the figure show the terminals) What we need to care is one thing and it is the connection on the HT coil. The PX125 HT coil has only one terminal for the hot (not grounded) AC terminal and we need to connect the wires colored red both from the stator and the junction box to the only terminal (terminal #2 on the figure) on the HT coil. (the terminal at the end of the wire from the junction box would be grounded when you push the kill switch)

Then you would need to connect the ground wire (which colored as black) to the metal body of the HT coil or on the motor case. I'm using the fixing nut of the HT coil as a terminal and connect both black wire from the stator and the junction box to the nut. In other words, the terminal #1 on the figure (original HT coil) is not exist on the PX125 HT coil but the fixing nut can be recognized as the terminal.

To summarize this, first on the junction box,
connection #1: Yellow wires (for tail/speedo/head lighting system) from the stator and wiring harness
connection #2: Sky blue wires (for the stop lamp) form the stator and wiring harness
connection #3: Green wires (for the horn) from the stator and wiring harness
connection #4: Red wires (for the ignition) from the stator/HT coil and wiring harness.

Second on the PX125 HT coil,
connection #5: Red wires from the stator/junction box. (it's your choice that where you connect each two on the HT coil or the junction box but you need at least one connection on each terminal)

Third on the PX125 HT coil fixing nut or the motor case,
connection #6: black wires from the stator/junction box.

Special note: thanx to Palmog, Tom G., Christopher Markley, and all the others that consistently share information with me. Many of my blog readers benefit from your knowledge and expertise.

Saturday, December 15, 2007

Purchasing retro tires

I just visited Clauss Studios to investigate if he may already have molds for the rubber for the floor rails on an SS. I understand that the width of replacement floor rail rubber is not wide enough for the original floor rails on the SS; therefore if my original rail can be reused I will not be able to replace the rubber.

While I visited Clauss Studios I found that he sells Shinko brand tires (formerly Yokohama) for cheap! We bought white wall'd Sava Kran Touring tires for $19.99 on clearance "as-is" from Motor Sport Scooter. A good deal on a mid-grade tire, but there are some small defects with the white walls.

It's a much better deal with Clauss.

http://www.claussstudios.com

Engine: Missing Fastener?

When Christopher Markley delivered our completely rebuilt SS engine he told me there were two items I'd need to look into. We'll talk about one now. There is a hole in the engine case that looks like a fastener should be used to seal it, but when Christopher investigated the parts diagram he saw nothing. Also, it did not appear to be threaded. Pictured above are my spare cases, with the same hole, but this hole is threaded very finely; therefore I am assuming something is screwed in there. I am pointing at the hole for your reference in the picture. Please post a comment and let me know what belongs in there.

Once I find out what screw goes in there, I can clean up the threads and put the correct fastener in place.

Thanks in advance for your help.

FOLLOW-UP / LESSON LEARNED:
This is where the junction box goes. (Thanx Paul)
Here is a photo of the stock junction box for your reference.

Vespa Christmas

Just received in the mail my wife's and my Christmas gift in one Scooter Works box. I asked for items that I need first to get the reassembly started. See previous "Christmas Wish List 2007" post for items asked for. We'll know more on the morning of 12/25 what we have. No matter what . . . it's more than we have now and we should be able to move forward some what. It's certainly a welcomed package in our household. I predict some movement, in the restoration world, is right around the corner (note: it's not a big box though so it does not mean the completion of the bike) .

Floor rail installation guide

In the not too distant future I hope to be reassembling the Vespa and since I am so terrible at just sitting and twiddling my thumbs I have been researching on how to install the floor rail kits.

I posted my question on BBS and Self Preservation Society sent to me a "how to" post he had written with photos (copy and paste link into your browser):

http://www.scooterbbs.com/bbs/dcboard.php?az=printer_friendly&forum=10&topic_id=316305&mesg_id=316316

I then wrote mentor Tom G. and asked if he approved of this method and this is what Tom G. said:
Yes.  Very easy, but you need to practice a bit to
make sure your tools and settings are correct. Also,
you need a quality air regulator to get the chisel to
slow down enough to control it - the cheapie
regulators don't work well.

I also wrote up a hand peening method on the BBS years
ago, and it has been posted on various restoration
sites. I recommend that you take a refrigerator
magnet and punch a hole in it. Place it around the
end of the rivet that sticks out of the body before
you start hammering. That way if your hammer slips
your paint is a little protected.

Tom
At this point I want to find out if my floor rails are reusable (I hope to just clean them up if they have tiny scratches and such) and if I can find replacement rubber for it. Maybe Claus Studio can produce the rubber?

Lesson Learned:
VSC owners -- the closest floor rail kit is for the Rally. Note: it is a bit short and maybe a dozen people tops in the USA will notice this so Rally is not a bad way to go. But make sure that you purchase the floor rail kit and shape it against your frame BEFORE it is painted or you run a high risk of messing your paint job up.

Again, sucks to me. Learn from my mistakes. I have to find a way to shape my floor rail (if I don't use originals) kit along my freshly painted bike. Not smart!

For more info search "floor rail" on the Vespa-Sport Yahoo Group. Good info in the archives.